New to BMX racing and someone at the track has asked what gear your child is running? Don’t worry: nearly every BMX parent has stood there looking at the chain wondering the same thing. In this guide, we explain BMX racing gears in plain English. We also give you sensible starting gears for riders aged 5 to 12 and show you how to tell if a change would help.
The short version: for young and new riders, an easier gear that gets them off the start gate quickly beats a hard gear almost every time. So start with the gear in the table below for your child’s age, watch how they ride, and then change only one tooth at a time.
What BMX racing gears are
A BMX race bike has just one gear. In other words, there are no gear levers to worry about. Instead, two toothed wheels set the gear:
- The chainring: the big toothed wheel at the front, attached to the pedals.
- The rear cog (or freewheel): the small toothed wheel on the back wheel.
We write BMX racing gears as front teeth / rear teeth, for example 41/17. Fewer teeth at the front, or more at the back, makes the bike easier to pedal and quicker to get going. On the other hand, more teeth at the front, or fewer at the back, makes it harder to pedal but faster once it is up to speed.
How to find out what gear your child has
First, look for the number of teeth stamped on the chainring and the rear cog, for example “41T” and “17T”. If you can’t find it, mark one tooth with chalk and count all the way round. Alternatively, ask your club coach or a BMX shop to check it for you.
Why easier gears usually win for young riders
BMX tracks are short, usually around 300 to 400 metres, and full of jumps and tight corners. As a result, riders win most races in the first few pedal strokes out of the gate and on the way out of each corner. That means quick acceleration matters more than top speed, especially for younger and lighter riders who don’t yet have the strength to push a big gear.
In fact, a gear that is too hard is the most common mistake we see with new riders. They get left behind at the start and then tire out before the end of the lap.
Starting BMX racing gears by age
These are good starting points, not rules. For example, smaller, lighter or brand-new riders should start at the easier end. Meanwhile, stronger or more experienced riders can go a little harder.
| Age | Wheel size | Example gears | Gear inches (approx.) |
|---|---|---|---|
| 5–6 | 18″ | 33/14 | 42 |
| 5–6 | 20″ | 39/17 | 46 |
| 7–8 | 20″ | 42/18 or 41/17 | 47–48 |
| 9–10 | 20″ | 42/17, 40/16 or 41/16 | 49–51 |
| 11–12 | 20″ | 44/17 or 42/16 | 50–52 |
What are “gear inches”?
Gear inches let you compare setups that use different numbers of teeth. To work them out, divide the front teeth by the rear teeth, then multiply by the wheel size. For example, 41/17 on a 20″ wheel is 41 ÷ 17 × 20, or about 48 gear inches. So two setups with similar gear inches will feel almost the same to ride. If you’d rather not do the maths, Sheldon Brown’s gear calculator will work it out for you.
Some coaches talk about roll-out instead. This is how far the bike travels for one full turn of the pedals. Simply multiply gear inches by 0.08 to get the roll-out in metres, so 48 gear inches is about 3.8 metres.
Are your child’s BMX racing gears right?
| What you see | What it probably means | What to try |
|---|---|---|
| Slow out of the start gate, struggling to get the pedals round | Gear too hard | Go one tooth easier |
| Tired legs and fading badly before the finish line | Gear too hard | Go one tooth easier |
| Fast off the gate but legs spinning flat out on the straights, then being passed | Gear may be too easy | Try one tooth harder |
| Quick off the gate and still pedalling comfortably at the end | About right | Leave it alone |
Other things affect the right gear too. For instance, short, twisty tracks suit easier gears, while tracks with long straights can suit a slightly harder gear. Your child will also need harder gearing as they grow and get stronger, so check it every few months.
How to change the gear
- First, talk to your club coach. They see your child ride every week and can tell you whether a change is needed.
- Next, change one thing at a time, usually the rear cog, by one tooth. A rear cog normally costs less than a new chainring. Also, one tooth at the back makes a bigger difference than one tooth at the front.
- Then check the chain. A bigger cog or chainring may need a slightly longer chain, and you will need to reset the chain tension.
- Finally, give it a few sessions before you decide whether it helped. Riders often feel slower on a new gear for the first ride or two.
Not confident with spanners? In that case, a BMX shop or an experienced parent at your club can usually swap a cog in a few minutes, so changing BMX racing gears is quick and cheap.
Quick questions from new parents
Does my child need the “right” gear to start racing?
No. Plenty of riders start on whatever BMX racing gears their bike came with. If your child can get going easily and enjoys it, that is the most important thing. After a few races, you can fine-tune the gear.
Should we copy what the fastest kids are using?
Not straight away. Faster riders often run harder BMX racing gears because they are stronger or more experienced. As a result, a gear that suits them can slow a newer rider down.
How often should we check it?
Check it every few months, and also whenever your child has a growth spurt or moves up an age group.
Final thoughts on BMX racing gears
In short, BMX racing gears are one small part of the sport. Get the gear roughly right, lean towards easier rather than harder, and then spend your energy on what makes the biggest difference: track time, good starts and having fun. If you are not sure, ask your club coach. After all, that is what they are there for.
New to the sport? Read our beginner’s guide to BMX racing and what to do on race day, or find a BMX club near you.